Lathe

OKUMA CNC LATHE

Crown Big Bore with Auto Loader

10.6” x 18” Capacity and 2 3/4” Bar Feed.  Features conversational color graphics programming.  Equipped with a Westech Gantry Loader with a 20 Position Pallet Magazine Feed System.  Feed System has a 7” Diameter with a 22 LBS Load Capacity

OKUMA CNC

Lathe Cadet-L1420

14 1/2” X 20” Capacity and 3 1/2” Bar Feed.  Features conversational color graphics programming.

KITAMURA 20B

CNC Lathe

10” x 20” Capacity and 1 3/4” Bar Feed capacity.  Features conversational color graphics programming.

KITAMURA 20

CNC Lathe

9” x 11-1/2” Capacity and 1 1/4” Bar Feed capacity.  Features conversational color graphics programming making 1 part runs possible.

HASS Bar Feeder Lathe

48” Length x 2-/12” Dia. Capacity. !0” Dia. Chuck. 10 Tool Capacity With Live Tooling

WEBB Manual Lathe

21” x 60” Lathe.  29” Swing in the gap, with quick change tool holders and digital readouts. 

WEBB Manual Lathe

17” x 40” Lathe.  26” Swing in the gap, with quick change tool holders and digital readouts.

Sharp Manual Lathe  2416OK

24” x 144” Lathe.  32” Swing in the gap, with quick change tool holders.

Mill

OKUMA CNC Vertical Machining Center

20” x 40” x 20” Travel with a 20 pocket tool changer, conversational programming with Virtual Gibbs Programming Software.

HASS VF1 Vertical CNC Machining Center

20” x 16” x 20” Travel with 20 pocket tool changer, conversational programming with Virtual GIBBS Programming Software

HASS VF2 Vertical CNC Machining Center

30” x 16” x 20” Travel with 20 pocket tool changer, conversational programming with Virtual GIBBS Programming Software

HAAS 4 Axes Horizontal Machining Center

24” x 20” x 22” Travel with 20 pocket automatic tool changer and 2 pallet changer

OKUMA MA40-HA 4 Axis Horizontal Machining Center

22” x 24” x 22” Travel with 100 piece tool holder. Tool setter and broken tool detection. FASTEMS FPC-750 10 pallet changer w/ 10 pallets for unattended machining

MILWAUKE 650 TF-20 Vertical Mill

20” X 108” Table with 60” travel.  Digital read out.

CINCINNATI MILACRON Horizontal / Vertical Mill

16” X 80” Table with 48” travel.

CINICIMATIC Horizontal Boring Mill

31” X 102” Table with 96” travel.  FANUC Controller

HAAS Rotary Indexer

4^th Axis rotary indexer model HA5C.

4^th Axis rotary indexer model HRT7.

These two indexers can be interfaced to allow 5 axis of motion.

BRIDGEPORT Manual Vertical Mill (1)

9” x 42” Table with digital readouts and all accessories. 

ALLIANT Manual Vertical Mills (4)

9” x 42” Table with digital readouts and all accessories.

Grind

BLANCHARD Grinder

18” x 36” with 15” under the wheel, 25 HP.

OKAMOTO Surface Grinder

12” x 24” magnetic chuck, 12” under wheel, fully auto.

CHALLENGER Surface Grinder

6” x 12” with magnetic chuck and hand feed.

TOYODA Cylindrical Grinder

12-1/2” x 39” Capacity

SUNNEN Hone

Hone 3/8” to 2 3/8” Capacity.

Weld

CNC High Definition Plasma Cutter

3/8” thick material, 5 ft. x 10 ft. material capacity. Cuts steel, aluminum, stainless & alloy.

MILLER CP200 MIG Welder

200 amp capacity.

MILLER SYNCROWAVE 351

TIG Welder

400 amp capacity.

MILLER Dynasty 300 DX

TIG Welder

250 amp capacity inverter system.

Welding Jig Surface

1ea. 5’ x 10’ Precision Ground

1ea. 4’ x 23’ Precision Ground w/ dowel &tapped hole pattern

1ea. 12’ x 20’ Precision Ground

Inspection

MITUTOYO Bright-M CMM

Coordinate Measuring Machine

20” x 30” x 16” Measuring area.  Software: GEO Measure 3000 V1.2

Enclosed in a 14’ x 14’ Environmental room.

VMS Measuring system

Electronic Measuring System on 2’ x 4’ Granite surface plate.

STARRETT Depth Gauges

Measures up to 6 inches.

STARRETT & MITUTOYO Micrometer

Measures up to 36 inches.

SUNNEN & MITUTOYO Bore Gauges

Gauges from 1/4 “ to 12”.  Sunnen settings fixtures.

MITUTOYO Height Gauges

Measures up to 24 inches.

Granite Surface Plate

Surface plate is 24” x 48” x 12”.

SPC System

QI Analyst.

Gage Blocks

Traceable, and all have calibration to NBS. 

Engineering

SolidWorks 2007

Solid modeling design capable of handling importing and exporting of solid modeling files.

AutoCAD Drafting Program

Capable of handling up to release 2004.  Exports and imports DWG, DXF, and IGES files through Release 2004.

VERTUAL GIBBS 7.3

CNC CAM Program

Capable on handling 3D programming.  Imports DWG, DXF, and IGES files.  Generates path layouts and graphic verify.

PLC Programming

Experience with: Allen Bradley, GE Fanuc, Siemens, and Toshiba.